Virtual Private LAN Services
Page 652 7750 SR OS Services Guide
tod-suite
Syntax tod-suite tod-suite-name
no tod-suite
Context config>service>vpls>sap
Description This command applies a time-based policy (filter or QoS policy) to the service SAP. The suite name
must already exist in the config>cron context.
Default no tod-suite
Parameters tod-suite-name — Specifies collection of policies (ACLs, QoS) including time-ranges that define the
full or partial behavior of a SAP. The suite can be applied to more than one SAP.
trigger-packet
Syntax trigger-packet [dhcp] [pppoe] [arp]
no trigger-packet
Context config>service>vpls>sap
Description This command enables triggering packet to initiate RADIUS authentication that provides a service
context. The authentication, together with the service context for this request, creates a managed SAP.
The VLAN is the same as the triggering packet. This SAP behaves as a regular SAP but the
configuration is not user-editable and not maintained in the configuration file. The managed SAP
remains active as long as the session is active.
Default none
Parameters dhcp — Specifies whether the receipt of DHCP trigger packets on this VPLS SAP when the keyword
capture-sap is specified in the sap command creation string, will result in a RADIUS
authentication that will provide a service context and the creation of a SAP with a value of
'managed'.
pppoe — Specifies whether the receipt of PPPoE trigger packets on this VPLS SAP when the
keyword capture-sap is specified in the sap command creation string, will result in a RADIUS
authentication that will provide a service context and the creation of a SAP with a value of
'managed'.
arp — indicates that ARP is the type of trigger packets for this entry.
To Next Page
Loading...
