Alcatel-Lucent 7750 SR - Page 677

Virtual Private LAN Services
7750 SR OS Services Guide Page 677
ais-enable
Syntax [no] ais-enable
Context config>service>vpls>sap>eth-cfm>mep
Description This command configures the generation and reception of Alarm Indication Signal (AIS) message
parameters.
client-meg-level
Syntax client-meg-level [level [level ...]]
no client-meg-level
Context config>service>vpls>sap>eth-cfm>mep>ais-enable
Description This command configures the client meg level.
Parameters level — Specifies the level(s).
Values 1..7
interval
Syntax interval {1|60}
no interval
Context config>service>vpls>sap>eth-cfm>mep>ais-enable
Description This command configures the transmission interval of AIS messages.
Parameters 1|60 — Specifies, in seconds, the interval.
Default 1 second
priority
Syntax priority priority-value
no priority
Context config>service>vpls>sap>eth-cfm>mep>ais-enable
Description This command configures the priority of AIS messages originated by the node.
Parameters priority — Specifies the priority.
Values 0..7
Default 7