VPLS Service Commands
7750 SR OS Services Guide Page 837
Default Inherits the chassis level configuration from config>service>mac-notification
Parameters value — Specifies the frequency of subsequent MAC notification messages.
Values 100 ms – 10 sec, in increments of 100 ms up to 1 sec and then in increments of 1
second up to 10 sec.
count
Syntax [no] count value
Context config>service>vpls bvpls>mac-notification
Description This command configures how often MAC notification messages are sent.
Parameters value — Specifies, in seconds, how often MAC notification messages are sent.
Values 1-10
Default Inherits the chassis level configuration from config>service>mac-notification
shutdown
Syntax [no] shutdown
Context config>service>vpls bvpls
Description This command disables the sending of the notification message in the BVPLS domain.
Default shutdown
backbone-vpls
Syntax backbone-vpls service-id [isid isid]
no backbone-vpls
Context config>service>vpls>pbb
Description This command configures B-VPLS service associated with the I-VPLS.
Parameters service-id — Specifies the service ID.
Values 1..2147483648
isid — Specifies the ISID.
Values 0..16777215
igmp-snooping