Page 840 7750 SR OS Services Guide
Default no mrp-policy
send-bvpls-flush
Syntax [no] send-bvpls-flush {[all-from-me] | [all-but-mine]}
Context config>service>vpls
Description This command configures the BVPLS flush. If B-SDPs are used and MAC notification mechanism is
turned on in the related BVPLS (MPLS use case), it makes sense to turn off the T-LDP MAC Flush.
mac-notification
Syntax mac-notification
Context config>service>pbb
Description This command controls the settings for the MAC notification messages.
interval
Syntax [no] interval value
Context config>service>pbb>mac-notification
Description This command controls the frequency of subsequent MAC notification messages.
Default 100 ms
Parameters value — Specifies the frequency of subsequent MAC notification messages.
Values 100 ms – 10 sec, in increments of 100 ms up to 1 sec and then in increments of 1
second up to 10 sec.
count
Syntax [no] count value
Context config>service>pbb>mac-notification
Description This command configures how often MAC notification messages are sent.
Parameters value — Specifies, in seconds, how often MAC notification messages are sent.
Values 1-10
Default 3