Show Commands
Page 844 7750 SR OS Services Guide
cfm-stack-table
Syntax cfm-stack-table
cfm-stack-table port [port-id> [vlan vlan-id]] [level 0..7] [direction up | down]
cfm-stack-table sdp [sdp-id[:vc-id]>] [level 0..7]] [direction up | down]
cfm-stack-table virtual [service-id] [level 0..7]
Context show>eth-cfm
Description Summarizes all MEPs/MIPs.
Parameters port-id — Displays information about the specified port.
Values port-id slot/mda/port[.channel]
lag-id lag-id
lag keyword
id 1 — 200
sdp-id[:vc-id] — Specfies an existing SDP and VC ID.
Values 1 — 17407
vlan-id — Specifies te VLAN ID.
Values 0 — 4094
level — Specifies the level.
Values 0 — 7
direction up | down — Indicates the direction in which the maintenance association (MEP or MIP)
faces on the bridge port.
down — Displays continuity check information configured away from the MAC relay entity.
up — Displays continuity check information configured toward the MAC relay entity.
service-id — Specifies information about the specified service ID.
Values 1 — 2147483648
Sample Output
*A:alcag1-R6# show eth-cfm cfm-stack-table
========================================================================
CFM SAP Stack Table
========================================================================
Sap Level Dir Md-index Ma-index Mep-id Mac-address
------------------------------------------------------------------------
1/2/9:5 4 Up 1 1 51 00:ae:ae:ae:ae:ae
========================================================================
CFM SDP Stack Table
========================================================================
Sdp Level Dir Md-index Ma-index Mep-id Mac-address
------------------------------------------------------------------------
No Matching Entries
========================================================================
*A:alcag1-R6#