Show Commands
Page 854 7750 SR OS Services Guide
Description This command filters debug events and only shows events related to the MAC address specified.
The no form of the command removes the debug filter.
Parameters ieee-address — xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx (cannot be all zeroes)
mrpdu
Syntax [no] mrpdu
Context debug>service>id>mrp
Description This command enables debugging of the MRP PDUs that are received or transmitted.
The no form of the command disables debugging of MRP PDUs.
periodic-sm
Syntax [no] periodic-sm
Context debug>service>id>mrp
Description This command enables debugging of the periodic state machine.
The no form of the command disables debugging of the periodic state machine.
registrant-sm
Syntax [no] registrant-sm
Context debug>service>id>mrp
Description This command enables debugging of the registrant state machine.
The no form of the command disables debugging of the registrant state machine.
sap
Syntax [no] sap sap-id
Context debug>service>id>mrp
Description This command filters debug events and only shows events for the particular SAP.
The no form of the command removes the debug filter.
Parameters sap-id — See Common CLI Command Descriptions on page 1469 for command syntax.
To Next Page
