IES Global Commands
Page 922 7750 SR OS Services Guide
type. The service-id must be the same number used for every 7750 SR, 7450 ESS and 7710 SR
on which this service is defined.
Values service-id: 1 — 2147483648
svc-name: 64 characters maximum
custom er
customer customer-id — Specifies the customer ID number to be associated with the service. This
parameter is required on service creation and optional for service editing or deleting.
Values 1 — 2147483647
vpn vpn-id — Specifies the VPN ID number which allows you to identify virtual private networks
(VPNs) by a VPN identification number.
Values 1 — 2147483647
Default null (0)
service-name
Syntax service-name service-name
no service-name
Context config>service>ies
Description This command configures an optional service name, up to 64 characters in length, which adds a name
identifier to a given service to then use that service name in configuration references as well as
display and use service names in show commands throughout the system. This helps the service
provider/administrator to identify and manage services within the 7750 SR, 7450 ESS and 7710 SR
platforms.
All services are required to assign a service ID to initially create a service. However, either the service
ID or the service name can be used o identify and reference a given service once it is initially created.
Parameters service-name — Specifies a unique service name to identify the service. Service names may not begin
with an integer (0-9).
igmp-host-tracking
Syntax igmp-host-tracking
Context config>service>ies
config>service>ies>sub-if>grp-if>sap
Description This command enables the context to configure IGMP host tracking parameters.
To Next Page
Loading...
