IES Service Configuration Commands
7750 SR OS Services Guide Page 953
valid-lifetime
Syntax valid-lifetime [seconds | infinite]
no valid-lifetime
Context config>service>ies>sub-if>grp-if>ipv6>dhcp6>proxy-server
Description The valid lifetime for the IPv6 prefix or address in the option, expressed in units of seconds.
Default 86,400
Parameters seconds — Specifies a decimal time interval in seconds.
Values 600-424967295
infinite — Specifies a 0xffffffff value, Dec = 4294967295
client-applications
Syntax client-applications [dhcp] [pppoe]
no client-applications
Context config>services>ies>sub-if>grp-if>ipv6>dhcp6>proxy-server
Description This command configures the client host types to which the DHCP6 proxy server is allowed to assign
addresses.
Parameters dhcp — Specifies IP over Ethernet hosts.
pppoe — Specifies PPP over Ethernet hosts.
local-dhcp-server
Syntax local-dhcp-server local-server-name
no local-dhcp-server
Context config>service>ies>if
Description This command assigns a DHCP server to the interface.
Parameters local-server-name — Specifies an existing local server name.
local-proxy-arp
Syntax [no] local-proxy-arp
Context config>service>ies>interface
config>service>ies>sub-if>grp-if
Description This command enables local proxy ARP. When local proxy ARP is enabled on an IP interface, the
system responds to all ARP requests for IP addresses belonging to the subnet with its own MAC