Alcatel-Lucent 7750 SR - Page 962

IES Interface Commands
Page 962 7750 SR OS Services Guide
host-limit
Syntax host-limit max-num-hosts
no host-limit
Context config>service>ies>sub-if>grp-if
Description This command configures the maximum number of ARP hosts.
Parameters max-num-hosts — Specifies the maximum number of ARP hosts.
Values 1 — 32767
min-auth-interval
Syntax min-auth-interval min-auth-interval
no min-auth-interval
Context config>service>ies>sub-if>grp-if
Description This command configures the minimum authentication interval.
Parameters min-auth-interval — Specifies the minimum authentication interval.
Values 1 — 6000
sap-host-limit
Syntax sap-host-limit max-num-hosts-sap
no sap-host-limit
Context config>service>ies>sub-if>grp-if
Description This command configures the maximum number of ARP hosts per SAP.
Parameters max-num-hosts-sap — Specifies the maximum number of ARP hosts per SAP allowed on this IES
interface.
Values 1 — 32767
arp-populate
Syntax [no] arp-populate
Context config>service>ies>interface
config>service>ies>sub-if>grp-if
Description This command, when enabled, disables dynamic learning of ARP entries. Instead, the ARP table is
populated with dynamic entries from the DHCP Lease State Table (enabled with lease-populate),
and optionally with static entries entered with the host command.