IES Service Configuration Commands
7750 SR OS Services Guide Page 971
system-id
Syntax [no] system-id
Context config>service>ies>if>dhcp>option>vendor
config>service>ies>sub-if>grp-if>dhcp>option>vendor
Description This command specifies whether the system-id is encoded in the vendor specific sub-option of Option
82.
proxy-server
Syntax proxy-server
Context config>service>ies>if>dhcp
config>service>ies>sub-if>grp-if>dhcp
Description This command configures the DHCP proxy server.
emulated-server
Syntax emulated-server ip-address
no emulated-server
Context config>service>ies>if>dhcp>proxy-server
config>service>ies>sub-if>grp-if>dhcp>proxy-server
Description This command configures the IP address which will be used as the DHCP server address in the
context of this SAP. Typically, the configured address should be in the context of the subnet
represented by service.
The no form of this command reverts to the default setting. The local proxy server will not become
operational without the emulated-server address being specified.
Parameters ip-address — Specifies the emulated server address.
lease-time
Syntax lease-time [days days] [hrs hours] [min minutes] [sec seconds] [radius-override]
no lease-time
Context config>service>ies>if>dhcp>proxy-server
config>service>ies>sub-if>grp-if>dhcp>proxy-server
Description This command defines the length of lease-time that will be provided to DHCP clients. By default the
local-proxy-server will always make use of the lease-time information provide by either a RADIUS
or DHCP server.
The no form of this command disables the use of the lease-time command. The local-proxy-server
To Next Page
Loading...
