IES Interface Commands
Page 996 7750 SR OS Services Guide
Packets that are generated in CPM and forwarded labeled within the context of a service (for
example, OAM packets) must also include a hash label at the BoS and set the S-bit accordingly.
The TTL of the hash label is set to a value of 1.
The no form of this command disables the use of the hash label.
Default no hash-label
ingress
Syntax ingress
Context config>service>ies>if>spoke-sdp
config>service>ies>redundant-interface>spoke-sdp>egress
Description This command configures the ingress SDP context.
vc-label
Syntax [no] vc-label ingress-vc-label
Context config>service>ies>if>spoke-sdp>ingress
config>service>ies>redundant-interface>spoke-sdp>ingress
Description This command configures the static MPLS VC label used by the far-end device to send packets to this
device in this service via this SDP.
Parameters ingress-vc-label — A VC ingress value that indicates a specific connection.
Values 2048 — 18431
accounting-policy
Syntax accounting-policy acct-policy-id
no accounting-policy
Context config>service>ies>interface>spoke-sdp
Description This command configures an accounting-policy.
Parameters acct-policy-id — Specifies an accounting policy ID.
Values 1..99
To Next Page
Loading...
