Amazone Condor 12001-C User Manual

Use of the implement
Condor 12001-C/15001-C BAH0030-4 07.15
151
10.4.1 Turning at end of the field
Before turning at the end of the field
1. Slow down your travel speed.
2. Do not reduce the tractor's rotational speed
too far so that the hydraulic functions
continue without interruption at the
headland.
3. Keep actuating the yellow tractor control
unit until the following are completely lifted:
 the coulters
 the star wheel.
4. Turn the combination.
Fig. 187
When turning at the end of the field
Do not switch off the hydraulic blower fan drive while turning! If
necessary, reduce the blower fan speed (minimum 1000 rpm),
however, do not reduce it so far as to cause blockage in the delivery
section.
After turning at the end of the field
1. Keep actuating the yellow tractor control unit until the following
are completely lowered:
 the coulters
 the star wheel.
2. Continue actuating the yellow tractor control unit for another 15
seconds and then put into neutral position
During the work, operate the yellow tractor control unit in neutral
position.
The pressure gauge (Fig. 188/1)
indicates the pressure that is applied
to the hydraulic cylinders.
Fig. 188

Amazone Condor 12001-C Specifications

General

Brand	Amazone
Model	Condor 12001-C
Category	Farm Equipment
Language	English