Amazone Condor 12001-C User Manual

Cleaning, maintenance and repairs
184
Condor 12001-C/15001-C BAH0030-4 07.15
12.5.8.2 Brake inspection (specialist workshop)
Work that must be carried out every 3 months, at the latest every 500
operating hours
1)
, in a specialist workshop:
 Check the service brake system for safe operating condition
 Check the wear of the brake linings.
Replace the brake shoes when the remaining lining thickness is
less than 2.0 mm (bonded linings). Use only original brake shoes
with type-tested brake linings. When doing so, the shoe return
springs may also have to be replaced.
 Checking the pressure in the compressed air tank (see Seite
186).
 Leak test of the dual-circuit pneumatic braking system (see Seite
186).
 Cleaning the line filters of the dual-circuit pneumatic braking
system (specialist workshop) (see Seite 187)
1)
This servicing interval is a recommendation. Depending on the use,
e.g. constant driving on hilly terrain, this may have to be shortened.
CAUTION
Observe the legal regulations for all service work.
Only genuine spare parts may be used.
The settings on the brake valves defined by the manufacturer
may not be changed.
In Germany Section 57 of the regulation BGV D 29 of the industrial
injuries mutual insurance organisation requires as follows:
the keeper has to have vehicles tested as required, however at least
once annually, by an expert as to their safe operating condition.

Amazone Condor 12001-C Specifications

General

Brand	Amazone
Model	Condor 12001-C
Category	Farm Equipment
Language	English