Product description
46
Condor 12001-C/15001-C BAH0030-4 07.15
4.7 Rating plate and CE mark
The following illustrations show the arrangement of the rating plate
(Fig. 26/1) and of the CE mark (Fig. 26/2).
The diagram shows the position of the rating
plate (Fig. 26/1) and the CE mark (Fig. 26/2) on
the implement.
The CE marking on the indicates compliance
with the stipulations of the valid EU directives.
Fig. 26
The following information is specified on the
rating plate and the CE mark (Fig. 27):
(1) Implement ID no.
(2) Type
(3) Basic weight kg
(4) Perm. system pressure total weight kg
(5) Perm. front axle load/drawbar load kg
(6) Perm. system pressure rear axle load
(7) Perm. system pressure bar
(8) Factory
(9) Model year
(10) Year of manufacture
Fig. 27