Cleaning, maintenance and repairs
170
Condor 12001-C/15001-C BAH0030-4 07.15
12.5.2 Adjusting the tramline to the track width/wheelmark spacing (specialist
workshop)
WARNING
Switch off the blower fan.
Direct persons out of the danger area
before unfolding the implement booms
before folding down the distributor heads.
Apply the tractor parking brake, switch the tractor engine
off and remove the ignition key.
1. Fold out the implement booms (see
section 10.1, Seite 138).
2. Before working on the distributor heads
(Fig. 215/1), fold them to the rear over
the frame of the implement boom.
3. Apply the tractor parking brake, switch
the tractor engine off and remove the
ignition key.
Fig. 215