Settings
120
Condor 12001-C/15001-C BAH0030-4 07.15
8.5.2 Setting the blower fan speed via the flow control valve of the tractor
1. Perform the basic setting of the pressure relief valve according
to section 8.5.4.1 or section 8.5.5.1 (depending on the version of
the pressure relief valve).
2. Read the required blower fan speed from section 8.5 (see page
117).
3. Set the blower fan speed via the flow control valve of the tractor.
8.5.3 Setting the blower fan speed on tractors without flow control valve
1. Read the required blower fan speed from the speed table (see
section 8.5.1).
2. Set the blower fan speed according to section 8.5.4.2 or section
8.5.5.2 (depending on the version of the pressure relief valve).
Design version of the pressure relief valve
The blower fan is equipped with a pressure relief valve that is
installed in two versions
Pressure relief valve with round outer
contour (Fig. 138/1)
Fig. 138
Pressure relief valve with hexagonal outer
contour (Fig. 139/1)
Fig. 139