Settings
130
Condor 12001-C/15001-C BAH0030-4 07.15
8.11 Half-sided switching off
1. Fold the implement booms out (see section
"Unfolding/folding the implement boom",
Seite 138).
2. Disengage the tractor PTO shaft, apply the
tractor parking brake, switch off the tractor
engine, and remove the ignition key.
DANGER
Disengage the tractor PTO shaft,
engage the tractor parking brake,
shut off the tractor engine and
remove the ignition key.
Fig. 157
3. Throw the lever to the right and lock it:
3.1 Lever to the right (Fig. 157/1):
Right half-width of the implement
1)
is
switched off
3.2 Lever to the left (Fig. 158/2):
Left half-width of the implement
1)
is
switched off
1)
Looking in the direction of travel
Fig. 158
4. Reduce the seeding rate to half.
4.1 Adjust the gearbox setting lever (Fig.
159/1) accordingly.
Fig. 159
Do not forget to switch the half-width of the implement back on again
after turning at the end of the field.