Cleaning, maintenance and repairs
160
Condor 12001-C/15001-C BAH0030-4 07.15
12.3 Lubrication specifications
WARNING
Apply the tractor parking brake, switch off the engine and
remove the ignition key.
The lubrication points on the implement are
marked with a foil sticker (Fig. 199).
Carefully clean the lubrication nipple and grease
gun before lubrication so that no dirt is pressed
into the bearings. Press the dirty grease out of
the bearings completely and replace it with new
grease.
Fig. 199
During the first hours of operation, the excess grease will be pressed
out and a light oil film forms on the bearing.
After the first heating up, no more grease/oil should escape.
Lubricants
For lubrication work use a lithium saponified multipurpose grease with
EP additives:
Company Lubricant designation
ARAL Aralub HL2
FINA Marson L2
ESSO Beacon 2
SHELL Retinax A
To Next Page
Loading...
Need help?
General
