General Safety Instructions
34
Condor 12001-C/15001-C BAH0030-4 07.15
2.16.6 Tyres
Repair work on tyres and wheels may only be carried out by
specialists with suitable installation tools.
Check the air pressure at regular intervals.
Inflate tyres to the specified air pressure! If the air pressure in
the tyres is too high, then there is a risk of explosions.
Park the implement in a safe place and lock the implement
against unintentional falling and rolling (parking brake, wheel
chocks), before carrying out work on the tyres.
Tighten or retighten all the fixing screws and nuts in accordance
with the specifications of AMAZONEN-WERKE.
2.16.7 Operation of the seed drill
Observe the permissible filling quantity of the hopper!
Only use the steps and the platform when filling the hopper!
It is forbidden to ride on the implement during operation.
During the calibration test, note the danger points from rotating
and oscillating implement parts.
Do not place any parts in the hopper.