Use of the implement
152
Condor 12001-C/15001-C BAH0030-4 07.15
10.5 End of work in the field
Only actuate the tractor control units from inside the tractor cab!
1. Switch off the blower fan.
2. Empty the hopper and the metering units (see section 10.6,
Seite 153).
Seed residues left in the seed metering units can swell or germinate,
if the seed metering unit is not completely emptied!
As a result, rotation of the metering rollers is blocked and damage can
be caused to the drive!
3. Move the implement into transport position (see section 10.1,
Seite 138).
4. Switch off the AMALOG
+
.