Transportation
Condor 12001-C/15001-C BAH0030-4 07.15
133
9.1 Set the implement to road transport mode
WARNING
Danger of crushing, shearing, cutting, being caught or drawn
in, winding and knocks through:
unintentional lowering of the implement raised using the
tractor's lower link hydraulic system.
unintentional lowering of raised, unsecured implement
parts.
unintentional start-up and rolling of the tractor-implement
combination.
Secure the tractor with the attached machine against unintentional
starting and rolling away before you make any adjustments to the
machine. See section 6.2, Seite 92.
Move the combination hitched on the tractor to transport
position:
1. Switch off the on board computer.
2. Empty the hopper (see section "Emptying the hopper and/or
metering unit.", Seite 153).
3. Close the hopper cover (see section "Filling the hopper", Seite
144).
4. Pivot the ladder to the side (see section "Filling the hopper",
Seite 144).
5. Fold the implement booms (see section "Unfolding/folding the
implement boom"), Seite 138.
6. Lock the tractor control unit.
7. Check the lighting system for proper function (see section
"Transportation equipment").
The warning signs and yellow reflectors must be clean and
undamaged, Seite 43.
8. Switch the work lights off during transport to avoid blinding other
motorists.
DANGER
Lock the tractor control units during road transport!