Commissioning
Condor 12001-C/15001-C BAH0030-4 07.15
85
6 Commissioning
This section contains information
on initial operation of your implement.
on checking how you may tow the implement to your tractor.
Before operating the implement for the first time the operator
must have read and understood the operating manual.
Take heed of section "Safety information for users", from Seite
27 onwards on
Coupling and uncoupling the implement
Implement transportation
Use of the implement
Only couple and transport the implement to/with a tractor which
is suitable for the task.
The tractor and implement must meet the national road traffic
regulations.
The operator and the user shall be responsible for compliance
with the statutory road traffic regulations.
WARNING
Risk of contusions, cutting, catching, drawing in and knocks in
the area of hydraulically or electrically actuated components.
Do not block the operator controls on the tractor which are used for
hydraulic and electrical movements of components, e.g. folding,
swivelling and pushing movements. The movement must stop
automatically when you release the appropriate control. This does not
apply to equipment movements that:
are continuous or
are automatically locked or
require a float position or pressure position due to their function.
To Next Page
Loading...
Need help?
General
