Cleaning, maintenance and repairs
Condor 12001-C/15001-C BAH0030-4 07.15
159
12.2.1 Clean the distributor head
WARNING
Switch off the blower fan.
Direct persons out of the danger area
before unfolding the implement booms.
before folding down the distributor heads.
Apply the tractor parking brake, switch the tractor engine
off and remove the ignition key.
1. Unfold the implement booms (see section
10.1, Seite 138).
2. Before working on the distributor heads
(Fig. 197/1), fold them to the rear over
the frame of the implement boom.
3. Apply the tractor parking brake, switch
the tractor engine off and remove the
ignition key.
Fig. 197
4. Slacken the winged nuts (Fig. 198/1) and
remove the clean plastic flap (Fig. 198/2)
from the distributor head.
5. Remove any impurities with a brush, and
wipe out the distributor head and plastic cap
with a dry cloth.
6. Clean impurities between the base plate
(Fig. 198/A) with compressed air.
7. Install the plastic cap (Fig. 198/2).
8. Fix the plastic cap with winged nuts (Fig.
198/1).
Fig. 198
Intensive cleaning requires the shutters to be removed according to
the instructions in section "Adjusting the tramline to the track width of
the cultivating tractor", Seite 172.