Cleaning, maintenance and repairs
Condor 12001-C/15001-C BAH0030-4 07.15
157
12.1 Securing the connected implement
Before working on the implement, place the
implement coupled to the tractor on the jack (Fig.
196) to prevent unintentional lowering of the
tractor's lower link.
Fig. 196
12.2 Cleaning the implement
DANGER
Wear a face mask. Do not inhale toxic dressing dust when
removing dressing dust by means of compressed air.
DANGER
Fully extend or retract the implement before cleaning it.
Never clean the implement if the rear frame and implement
booms are not completely folded.
Pay particular attention to the brake, air and hydraulic hose
lines.
Never treat brake, air and hydraulic hose lines with petrol,
benzene, petroleum or mineral oils.
After cleaning, grease the implement, in particular after cleaning
with a high pressure cleaner/steam jet or liposoluble agents.
Observe the statutory requirements for the handling and removal
of cleaning agents.