General Safety Instructions
26
Condor 12001-C/15001-C BAH0030-4 07.15
Fig. 3
2.14 Dangers if the safety information is not observed
Non-compliance with the safety information
can pose both a danger to people and to the environment and
implement.
can lead to the loss of all warranty claims.
In particular, non-compliance with the safety information could pose
the following risks:
Danger to people through non-secured working areas.
Failure of important implement functions.
Failure of prescribed methods of maintenance and repair.
Danger to people through mechanical and chemical impacts.
Risk to the environment through leakage of hydraulic fluid.
2.15 Safety-conscious working
Besides the safety information in this operating manual, the generally
applicable national workplace safety and accident prevention
regulations are binding.
Comply with the accident prevention instructions on the warning
symbols.
When driving on public roads and routes, comply with the appropriate
statutory road traffic regulations.