Chapter 3 Software Navigation
Page 150 of 314 Part Number: 0160-6411, Rev A, 02/2019
Software Release: cOS 5.00
Adjust the desired parameters on the Cataract Incisions Adjust Primary Geometric Details
Screen, and then press the button to go to the Cataract Incisions Adjust Sideport(s)
Geometric Details Screen; press the BASIC button to return to the Adjust Cataract Incisions
(Basic) Screen; or press the DONE button to return to the Cataract Incisions Review Screen.
Figure 3.108 Cataract Incisions Adjust Sideport(s) Geometric Details Screen
Adjust the desired parameters on the Cataract Incisions Adjust Sideport(s) Geometric Details
Screen, and then press the button to go to the Cataract Incisions Adjust Primary Laser
Details Screen; press the button to go to the Cataract Incisions Adjust Primary Geometric
Details Screen; press the BASIC button to return to the Adjust Cataract Incisions (Basic) Screen;
or press the DONE button to return to the Cataract Incisions Review Screen.
To Next Page
Loading...
