9
Function Code List (Continued)
F 24 Axis Designation 72
F 25
Zero Output Time Select (With I/O Option Only)
141
F 26 Feedrate ON/OFF 57
F 27
RS-232 Setup (With I/O Option Only)
143
F 28
RS-232 ON/OFF (With I/O Option Only)
146
F 29
Mill/Lathe Setup (900 Only)
77
F 31
Clear Datum (N/A For 900, Lathe Mode)
114
F 32
Clear Tool Offset (900, Lathe Mode Only)
119
F 33
Zero Output ON/OFF (With I/O Option Only)
139
F 34 Job Clock ON/OFF 58
F 35
Modify Tool Offset (900, Lathe Mode Only)
118
F 37
Entering Target Z-Depth and Spark-Out Time (900E Only)
181
F 38
Relay 1 Setup (900 With I/O Option Only)
Z-Depth Guard Setup, Relay 1 (900E Only)
152
177
F 39
Relay 2 Setup (900 With I/O Option Only)
Spark-Out/SparkArrest
TM
Setup, Relay 2 (900E Only)
152
179
F 40 Linear Encoder Error Detect OFF 74
F 41 Linear Encoder Error Detect ON 74
F 42
Output Test (With I/O Option Only)
155
F 45 Diagnostics 75
F 46
First Spark Detection Setup (900 With CSS and I/O Options)
171
F 48
CSS/Direct RPM Input (900 With CSS and I/O Options)
161
F 50
DAC Output Voltage ON/OFF (900 With CSS and I/O Options)
164
To Next Page
Loading...
