5-4 ISDB-T and BER Verification, Options 30 and 79 Option Verification
5-6 PN: 10580-00255 Rev. J MT8212E and MT8213E MM
5-4 ISDB-T and BER Verification, Options 30 and 79
Introduction
The tests in this section verify the performance of the optional ISDB-T Signal Analyzer option of the MT821xE.
These tests include:
• “Frequency Accuracy Verification” on page 5-7
• “Frequency Lock Range Verification” on page 5-8
• “Level Accuracy Verification” on page 5-10
• “Displayed Average Noise Level (DANL) Verification” on page 5-13
• “Phase Noise Verification” on page 5-13
• “BER Measurement Functional Check, Option 79 Only” on page 5-15
Equipment Required
• Anritsu MG3700A Vector Signal Generator
• Anritsu MN63A Programmable Attenuator
• Anritsu ML2438A Power Meter
• Anritsu MA2482D Power Sensors (2)
• Anritsu 1N50C RF Limiter
• Anritsu 34NN50A Adapter
• Anritsu 15NNF50-1.5C RF Coaxial Cables (3)
• Aeroflex/Weinschel 1870A Power Splitter
• Aeroflex/Weinschel 44-10 10 dB Fixed Attenuator
• Mini-Circuits TIA-1000-1R8 RF Power Amplifier
• Midwest Microwave ADT-2615-NF-BNM-02 Adapters (2)
• 10 MHz Reference Standard
To Next Page
Loading...
