CPS100 SERIES OPERATION MANUAL
SECTION 5:
Unpacking and Installation
Entire Contents Copyright 2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CPS100 Series Power Source Operation Manual Page 43 of 231
c. Each should get a firm handhold underneath the unit by placing their hands
on each side of the unit near the front and back of the unit respectively. This
will help divide the weight between both persons when lifting.
d. While keeping their backs straight, lift the unit out of the bottom foam
insert and off the pallet simultaneously by straightening legs.
e. Place the unit on the intended staging surface, usually a bench or table.
To Next Page
Loading...