APS CPS100 Series - Ship Kits; CPS Series Ship Kit Contents; Figure 5-3: CPS100 Series Ship Kit Content; Table 5-1: CPS Series Included Accessories Ship Kit

CPS100 SERIES OPERATION MANUAL
SECTION 5:
Unpacking and Installation
Entire Contents Copyright  2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CPS100 Series Power Source Operation Manual Page 44 of 231
Ship Kits
All units are shipped with a ship kit that may contain several items. Ship kits can vary by
model so check the contents of the ship kit you received against the relevant table below. If
any items appear to be missing, contact Adaptive Power Systems customer service.
(support@adaptivepower.com
).
5.3.1 CPS Series Ship Kit Contents
The following accessories are included with each CPS model power source. See image below
for reference.
Item #
ITEMS INCLUDED
QTY
A
Rack mount Handles (removable)
1
2
B
Input Terminals Safety Cover
1
C
Output Terminals Safety Cover
1
D
Screws to install Rack mount Handles
12
E
RS232 Serial Cable, 1 meter
1
F
LAN Cat-5 Cable, 1 meter
1
G
USB Cable, 1 meter
1
H
Option -GPIB / LAN+GPIB, GPIB Cable
1
I
Option -AUX or -MSB, DVI Cable
1
J
Option -AUX or -EXT, BNC Cable
1
Table 5-1: CPS Series Included Accessories Ship Kit
Figure 5-3: CPS100 Series Ship Kit Content
Note 1: Rack handle height varies by model (2U, 3U or 4U)