APS CPS100 Series - STORE; RECALL Screens; Figure 6-15: STORE; RECALL Menu Structure

CPS100 SERIES OPERATION MANUAL
SECTION 6:
Front Panel Operation
Entire Contents Copyright  2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CPS100 Series Power Source Operation Manual Page 148 of 231
STORE / RECALL Screens
The STORE/RECALL screen is used to manage power source setups. The Store/Recall Menu
structure is shown in the diagram below.
Figure 6-15: STORE / RECALL Menu Structure
The power source has 51 non-volatile
Channel registers that store instrument
settings including Vac, Vdc and frequency. It
also has 9 non-volatile register Groups that
store system settings including user
measurement screen configurations.
The memory resources are access using the
following four soft keys:
• Save Output
• Save System
• Recall Output
• Recall System
Store/
Recall
Save Output Save System Recall Output Recall System