EasyManua.ls Logo

Argo McCORMICK X6.430 STD/LS - Page 58

Argo McCORMICK X6.430 STD/LS
386 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-8
Controls - Cab
X6 - P/N 6525032M1
14. Seat suspension adjustment (if installed)
(Fig. 3-14)
The seat suspension can be adjusted to the ground condi-
tions (road or rough terrain) and to the operator's weight.
To adjust the reaction of the seat suspension, turn the
lever to the required position and release it.
Pos. 1 = soft suspension
Pos. 2 = average suspension
Pos. 3 = hard suspension
Position 2 is recommended for operators of average body
weight.
Fig. 3-14
13. Seat swiveling (if provided)
(Fig. 3-14)
Operate the switch (1) to activate the seat heating.
Fig. 3-14
1
Compartment for manuals
(Fig. 3-14A)
The compartment is behind the back rest.
To open the compartment, pull the tab (1) up and pull
back the panel (2).
IMPORTANT:
Keep with care this operation and mainte-
nance manual on your tractor. Before driving or operating
your tractor, it is mandatory to read this manual carefully,
with special attention to the chapter concerning safety
rules. Keep the manual always ready at hand in the manual
storage compartment for easier reference. If the tractor
should be used also by persons that do not understand
the language of the Country, the employer (or the machine
user) must translate the operating instructions in the lan-
guage understood by these operators.
Fig. 3-14A

Table of Contents

Related product manuals