STwrench User Guide Working with ToolsNet
9836 4134 01 Edition 2.9 237 (326)
Select ToolsNet → Settings and enter the following settings:
The channels available depend from the regulatory domain selected. Select the
channel(s) and click on OK to confirm.
Data rate
Select the data rate. A slower value may help when the communication is not
high-performance.
Power mode
The Sleep mode is recommended for lower power consumption.
Roaming threshold
Select the threshold under which the STwrench will search for a new access
point to connect through.
To Next Page
Loading...
Need help?
General
