www.ayyeka.com | +1 (310) 876-8040 | info@ayyeka.com 48
4. In the Create Technical Alert window:
a. Select a Recipient Group. All members of the group you specify will receive the alert. Note that you
need to first define a user group, as described in Managing User Groups.
b. Select the Alert Type: Email, SMS, or Email & SMS.
c. In Communication Status Threshold:
Check the Communication Status Threshold box if you wish to send an alert upon a
communication status threshold being crossed.
Select whether to send an alert when communication status is Delayed or Interrupted beyond
the configured threshold. Note that each device has its own Delayed Transmission and
Interrupted Transmission thresholds, set at the device level. You can view and set these
thresholds as described in Setting the Device Reporting Profile.
d. In Internal Humidity Threshold:
Check the Internal Humidity Threshold box if you wish to send an alert upon an internal
device humidity threshold being crossed.
Use the slider to set the upper humidity threshold (in percentage of humidity). If the internal
humidity level rises to above the threshold, a humidity threshold alert will be sent.
e. In Internal Battery Threshold:
Check the Internal Battery Threshold box if you wish to send an alert upon an internal battery
threshold being crossed.
Use the slider to set the lower battery threshold (in percentage of battery power remaining). If
the internal battery level falls to below the threshold, a battery threshold alert will be sent.
f. Click Submit.
To Next Page
Loading...