www.ayyeka.com | +1 (310) 876-8040 | info@ayyeka.com 88
Setting a Stream’s Custom Sampling Interval Value
You can change a specific stream’s custom sampling interval value. However, first check whether the stream is
configured to accept a custom sampling interval value, as described in Discovering a Stream’s Association with a
Sample Group. If it is not, configure the stream to accept a custom sampling interval value, as described in
Changing a Stream’s Association with the Sample Groups.
To set a stream’s custom sampling interval:
1. Click Devices in the sidebar.
2. In the Sites Tree pane, click the device name.
3. In the right pane, click the Configuration tab.
4. In the Stream Management table, hover over the line displaying the number of the sample group
whose sampling interval you wish to modify. A green pencil icon appears at the right end of the line.
Figure 70: Option for modifying the Sampling Interval
5. Click the green pencil icon :
6. In the Update Sampling Interval window that appears, modify the value of the sampling interval in
seconds.
Figure 71: Setting a custom sampling interval
7. If you changed a stream’s sampling interval value, you must reboot the device in order for the change to
take effect. Refer to Rebooting a Device.
To Next Page
Loading...