B&R Automation PC 620 - Page 526

526
Maintenance / Servicing • Installing the UPS module
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
• Remove cover plate by removing the marked Torx screw (T10).
• Screw in spacing bolt (using M5 hex socket screwdriver).
• Install mounting bracket on UPS module using 2 Torx screws (T10).
Figure 300: Remove cover plate
Figure 301: Screw in spacing bolt
Figure 302: Install mounting bracket
14 mm spacing bolt
Mounting bracket
+ 2 Torx screws