Maintenance / Servicing • Installing the UPS module
Section 7
Maintenance / Servicing
527Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
• Install UPS module with 2 Torx screws (T10) and 1 Torx screw (T10). Use the previously
removed Torx screws and one Torx screw from the mounting materials.
• Plug in connection cable (see marked socket).
• Attach cover plate and side cover.
Figure 303: Install UPS module
Figure 304: Plug in connection cable
Information:
When connecting the cable, make sure that the connector locking mechanism is
engaged.
Figure 305: Connector locking mechanism
To Next Page
Loading...
