R5906848 /04 DP2K SLP Series256
Image 19-7: Projector software update
9. Select the way the wizard will update the package. Check the desired radio button (16).
10. If automatically is selected the wizard gathered the information (17). Then click Next to start the update (20).
If custom update (for advanced users) is selected, the wizard starts collecting the information (17) of the
different software modules.
11. Select the modules to update (19) and click Next to start the update (20).
The update can take a lot of time. Make sure not to interrupt the power during the update process.
At the end, an update status will be displayed.
Software update via Communicator (DC update companion)
To Next Page
Loading...
