To Next Page

To Previous Page

R5906848 /04 DP2K SLP Series 355

Code 20252: “LDM 1 – Mains voltage too low”

Situation Solution

Wiring issue Check wiring between LDM and the mains. Replace the power cable if

necessary.

Malfunction mains voltage See Mains voltage errors.

Code 20255: “LDM 1 – mains voltage too high”

For this error the same troubleshooting table can be applied to as for code 20252: “LDM 1 — Mains voltage

too low”.

Code 20259: “LDM 1 – Heatsink PFC temperature too high”

Situation Solution

Problem with cooling of the

LDM

Check the projector filters. Clean or replace them if necessary.

Check the LDM fans. Replace them if necessary. See service procedure

“Removing a fan from an LDM”, page 51.

Malfunction Laser Driver

Module

Replace the LDM. See service procedure “Replacing a Laser Drive

Module”, page 56.

Code 20260: “LDM 1 – heatsink PFC temperature sensor short”

Situation Solution

Malfunction Laser Driver

Module

Replace the LDM. See service procedure “Replacing a Laser Drive

Module”, page 56.

Code 20261: “LDM 1 – heatsink PFC temperature sensor open”

Situation Solution

Malfunction Laser Driver

Module

Replace the LDM. See service procedure “Replacing a Laser Drive

Module”, page 56.

Code 20265: “LDM 1 – heatsink pfc aux temperature too high”

For this error the same troubleshooting table can be applied to as for code 20259: “LDM 1 — heatsink pfc

temperature too high”.

Code 20266: “LDM 1 – heatsink pfc aux temperature sensor short”

For this error the same troubleshooting table can be applied to as for code 20260: “LDM 1 — heatsink pfc

temperature sensor short”.

Code 20267: “LDM 1 – heatsink pfc aux temperature sensor open”

For this error the same troubleshooting table can be applied to as for code 20261: “LDM 1 — heatsink pfc

temperature sensor open”.

Code 20271: “LDM 1 – heatsink rectifier temperature too high”

For this error the same troubleshooting table can be applied to as for code 20259: “LDM 1 — heatsink pfc

temperature too high”.

Code 20272: “LDM 1 – heatsink rectifier temperature sensor short”

For this error the same troubleshooting table can be applied to as for code 20260: “LDM 1 — heatsink pfc

temperature sensor short”.

Troubleshooting

Brand	Barco
Model	DP2K SLP Series
Category	Projector
Language	English

Barco DP2K SLP Series Service Manual

Table of Contents

Other manuals for Barco DP2K SLP Series

Questions and Answers:

Barco DP2K SLP Series Specifications

Related product manuals