Bentel Security FireClass 200 - Welcome Message (Mesini)

Installer code The installer code accesses all menus.
The default installer code is 00000.
Enter the new installer code: each digit will
be masked by the symbol Q.
Press the ↵ key to confirm the new code or press ESC to exit without sav-
ing.
User code The user code can access the MODIFY-
ING menu only. The default user code is
11111.
Enter the new user code: each digit will be
masked by the symbol Q.
Press ↵ to confirm the new code or press ESC to exit without saving.
Welcome Message (MesINI)
The 20-character Welcome Message (Fire Class 200 at default), shown
on the first line of the display during standby can be edited as follows.
Select the MesINI option from the PRO-
GRAMMING menu (press 4).
Enter the new message then press the ↵
key to confirm or ESC to exit without sav-
ing.
Programming:
INSTALLER CODE
enter the new
code : XXXXX
Programming:
INSTALLER CODE
enter the new
code : *XXXX
Programming:
USER CODE
enter the new
code : XXXXX
Programming:
USER CODE
enter the new
code : *XXXX
1=Auto 2=Devices
3=PassWD 4=MesINI
5=Zones 6=Opt 7=Sys
8=Ver 9=Def Ø=Tel
PROGRAMMING
WELCOME MESSAGE
enter the new one:
welcome message¤
PROGRAMMING 55