Accessing the system
Press any key, except RESET and TEST,
to access the FireClass200 system.
The display will show the MAIN menu.
Select the required option, and refer to the respective section.
Exit If no key is pressed within 20 seconds, the control panel will exit automat-
ically.
FIRE CLASS 2ØØ
Scanning Loop
>> >> >>
ØØ:ØØ 23/11/98 Mon
FIRE CLASS 2ØØ
1= Programming
2= Modifying
3= Reading Parameter
USING THE SYSTEM 37
To Next Page
Loading...
