Bentel Security FireClass 200 - Factory; Restore Default; Maintenance

Factory
The Factory option from the PROGRAMMING menu resets the manufac-
turers settings (Default) on the control panel.
Select Def from the PROGRAMMING
menu (press 9).
The display will show ...
Select the required option and refer to the respective section, or press
ESC to exit and step back to the PROGRAMMING menu.
Restore default
Select the Restore default option from the
FACTORY menu (press 1).
Press the ↵ key to Restore Default set-
tings, or ESC to exit and step back to the
FACTORY menu.
Maintenance
Select the Maintenance option from the FACTORY menu to program the
required date.
Select the Maintenance option from the
FACTORY menu (press 2).
1=Auto 2=Devices
3=PassWD 4=MesINI
5=Zones 6=Opt 7=Sys
8=Ver 9=Def Ø=Tel
PRG: FACTORY
1= Restore Default
2= Maintenance
PRG: FACTORY
1= Restore Default
2= Maintenance
PRG: FACTORY
Restore default
Are you sure ?
Yes=Enter
PRG: FACTORY
1= Restore Default
2= Maintenance
72 Analogue Fire Control Panel FireClass200