Bentel Security FireClass 200 - Log

The display will show the control panel
version. Press ESC to step back to the
READING PARAMETER menu.
Log
The FireClass200 Log stores 200 events. When the log is full the oldest
events will be deleted automatically to make space for the new events.
1. Select the Log option from the READING
PARAMETER menu (press 4), or press
ESC to step back to the MAIN menu.
2. The display will show the most recent
event.
N.B. The example shows no.123 as being
the most recent event.
3.
Press the ← to scroll back.
4.
Press the → key to scroll forward.
5. Press ESC to exit and step back to READINGS menu.
When the ← key is pressed on the oldest
event ...
Fire Class 2ØØ
version
3.Ø
READINGS:
1=Dev./Zones/Outputs
2=Opt.3=Ver.4=Log.
5=Print 6=M.Telecom
ZONE ALARM 123
FIRE CLASS 2ØØ
Software Zone
15:Ø9 13/Ø7/99 Ø1
ALARM 122
FIRE CLASS 2ØØ
Device: MODULE
15:Ø9 13/Ø7/99 1M13
ZONE ALARM 123
FIRE CLASS 2ØØ
Software Zone
15:Ø9 13/Ø7/99 Ø1
FAULT ØØØ
FIRE CLASS 2ØØ
Missing MAIN
18:Ø2 Ø5/Ø7/99
READING PARAMETER 89