EasyManua.ls Logo

Bentel Security FireClass 200 - FC200 and FC100

Bentel Security FireClass 200
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FC200 and FC100 Features
FC200 FC100
EN54 Approved EN54 Approved
2 analogue loop: supports 99 sensors and 99
modules
1 analogue loop: supports 99 sensors and 99
modules
Automatic device-drift compensation Automatic device-drift compensation
Modular loop management
1 conventional input line: supports 30 fire de-
tectors and an unlimited number of Callpoints
1 conventional input line: supports 30 fire
detectors and an unlimited number of
Callpoints
16 programmable software zones 16 programmable software zones
16 alarm repeat outputs (open-collectors): 1
per zone
16 alarm repeat outputs (open-collectors): 1
per zone
1 "C" alarm output 1 "C" alarm output
4 programmable, supervised, silenceable
alarm output (relays) ---- expandable to 16 us-
ing FC-200/6OUT expander modules
1 programmable, supervised, silenceable
alarm output (relay)
1 NON-supervised, NON-silenceable ancillary
alarm output (relay)
1 NON-supervised, NON-silenceable Fault out-
put (relay)
RS485 Interface ---- supports 8 repeaters RS485 Interface ---- supports 8 repeaters
RS232 Interface for serial printer ---- linked to
the Control panel or a PC for upload/download
operations
RS232 Interface for serial printer ---- linked to
the Control panel or a PC for upload/download
operations
200 event log 200 event log
Supports 2 FC200/6OUT output expanders to
provide 16 outputs
Supports 2 FC200/6OUT output expanders to
provide 13 outputs
Local/Remote Upload/Down load from PC Local/Remote Upload/Down load from PC
TELECOM Module (Accessory item) TELECOM Module (Accessory item)
Power supply: 230 Vca +/- 10% Power supply: 230 Vca +/- 10%
Available with 2.5 A power supply/battery charger
and with 27.6V-4A linear power supply
Available with 2.5 A power supply/battery
charger
Housing for 2 x 17 Ah batteries Housing for 2 x 17 Ah batteries
Dimensions (w x h x d): 432 x 577 x 131 mm Dimensions (w x h x d): 432 x 577 x 131 mm
Weight (without batteries): max. 9.0 Kg Weight (without batteries): max. 9.0 Kg
FC200 and FC100
The Installer and Operator manuals can be used with FC200 and FC100
Fire Control panels, however, where features and capacity differ, refer to
the above table.
6 Analogue Fire Control Panel FireClass200

Table of Contents

Related product manuals