Remote management
Select Remote management from the
PRG:TELECOM MODULE menu (press
5) to enable (ON) or disable (OFF) Tele-
service. When the Teleservice option is
ON the installer will be able to service the
control panel, and change the parameters
via telephone. When Teleservice is OFF
this will not be possible. The installer must
be equipped with the optional OM-
NIAMOD/V1 or OMNIAMOD/V2, and the
respective software in order to provide this
service.
PRG: TELECOM MODULE
Remote Managem.=OFF
80 Analogue Fire Control Panel FireClass200
To Next Page
Loading...
