Press the ↵ key to suspend the Print or press ESC to go back to step 3.
Print
Programming
The Programming option from the PRINT menu is reserved for future use.
If the Programming option is selected from the PRINT menu.
The display will show ...
Press ESC to step back to the PRINT menu (step 2.).
Telecom Module
Select the Telecom Module option from
the PARAMETER READING menu to
view the Telecom module settings.
Select Tel.Mod. from the PARAMETER READING menu (press 6), or
press ESC to step back to the Main menu.
The display will show ...
Select Telephone numbers (press 1) to view the programmed Telephone
numbers (01 to 32).
The display will show ...
READINGS
Print:
1= Log 2=
Programming
Programming Data
Print
Future Use
Future Use
READINGS:
1=Dev./Zones/Outputs
2=Opt.3=Ver.4=Log.
5=Print 6=M.Telecom
Rd. :Telecom Module
1=Telephone Numbers
2=Messages
3=Management
Rd. :Telecom Module
Telephone Numbers
Number : 01
___________________
92 Analogue Fire Control Panel FireClass200
To Next Page
Loading...
