Bentel Security FireClass 200 - System; Date and Time

System
Select the Sys option from the PRO-
GRAMMING menu (press 7) to access
and program the system parameters.
The display will show ...
Select the required option, according to the following table, and refer to the
respective section or press ESC to step back to the PROGRAMMING
menu.
KEYS SYSTEM PARAMETERS
1 Date/Time
2 Blink
3 Wire
4 SIL (Silence)
5 WT (Walk Test)
6 NET (Network)
7 Printer
Date and Time
The Date/Time option from the SYSTEM menu is for the control panel
clock settings.
Select Date/Time option from the SYS-
TEM menu (press 1).
Enter the required Time and Date. Press
the ↵ key to confirm, or ESC to exit without
saving and step back to the SYSTEM
menu.
+
The day of the week must correspond to the selected date in order to en-
sure proper functioning.
1=Auto 2=Devices
3=PassWD 4=MesINI
5=Zones 6=Opt 7=Sys
8=Ver 9=Def Ø=Tel
PRG: SYSTEM
1=Date/Time 2=Blink
3=Wire 4=SIL 5=WT
6=NET 7=Printer
PRG: SYSTEM
1=Date/Time 2=Blink
3=Wire 4=SIL 5=WT
6=NET 7=Printer
PRG: SYSTEM
Date/Time
Time: ØØ:ØØ
Date: 24/11/98 Tue
66 Analogue Fire Control Panel FireClass200