EasyManua.ls Logo

Bosch B9512G - Shortcut Menu; Function; Set;Clear All

Bosch B9512G
284 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
130 en | Shortcut Menu Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
7 Shortcut Menu
7.1 Function
Default:
– Shortcut Menu Item 1: All On Selected Area
– Shortcut Menu Item 2: Off Select Area
– Shortcut Menu Item 3: View Point Status
– Shortcut Menu Item 4: Reset Sensors
– Shortcut Menu Item 5: Change Watch Mode
– Shortcut Menu Item 6: Brightness (SDI2) / Dim (SDI)
– Shortcut Menu Item 7: Volume (SDI2) / Dim (SDI)
– Shortcut Menu Item 8: View Log
– Shortcut Menu Item 9-32: Disabled Item
Selections:Refer to table below.
This parameter assigns functions to menu items.
Select the function from the drop down list in the dialogue box that appears when you double-
click a cell in the Function column and next to the function in the User Configuration section.
All supported custom functions are listed by their configured Custom Function Text, page 127.
There is no restriction on how many times you might assign a specific function to the menu. By
doing so, you can assign the same function at different keypads so they appear in a different
order in some areas than they would in others.
Function Function Function
Disabled Item
All On Delay
All On Instant
All On Select Area
Part On Delay
Part On Instant
Part On Select Area
Off
Off Select Area
Extend Close
Bypass a Point
Unbypass a Point
View Area Status
View Point Status
Send Status Report
Reset Sensors
Change Output State
Fire Walk Test
Intrusion Walk Test
Service Walk Test
Invisible Walk Test
Send Test Report
Display Revisions
RPS Answer
RPS via Network
RPS via Network, Change
Port
RPS via Phone
Go to Area
Update Firmware
View Service Bypassed
Cycle Door
Unlock Door
Lock Door
Secure Door
Change Passcode
Add User
Edit User
Delete User
Change Watch Mode
Set Panel Date
Set Panel Time
Show Date/Time
Change Skeds
Brightness (SDI2) / Dim (SDI)
Volume (SDI2) / Dim (SDI)
Keypad Nightlight
Silence Key Tone
View Event Memory
Delete Event Memory
View Log
A Key Alarm (Fire)
B Key Alarm (Medical)
C Key Alarm (Silent/Panic)
Fire Alarm Silence
Fire Trouble Silence
Fire Detector Reset
Fire Annunciator Reset
Fire Keypad Mute
Fire Reset
Fire Drill
Function ### (128 to 159)
RPS Menu Location
Shortcut Menu > Function
7.2 Set/Clear all
Default: Set/Clear All

Table of Contents

Other manuals for Bosch B9512G

Related product manuals