Bosch B9512G - Delete User Passcode; Card; Level; Extend Close; View Event Log; User Command 7

166 en | User Configuration Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
RPS Menu Location
User Configuration > Authority Levels > Add User Passcode/Card/Level
9.4.24 Delete User Passcode / Card/ Level
Default:
Authority Levels 1, 15: Enabled (E)
Authority Levels 2-14: Blank (-)
Selections:
– Blank(-): This function is not authorized for the user who is assigned this authority level.
– Enabled (E): This function is authorized for the user who is assigned this authority level.
This parameter allows the user with this L## to delete users.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > Delete User passcode/card/level
9.4.25 Extend Close
Default: Service Walk
Authority Levels 1, 15: Enabled (E)
Authority Levels 2-14: Blank (-)
Selections:
– Blank(-): This function is not authorized for the user who is assigned this authority level.
– Enabled (E): This function is authorized for the user who is assigned this authority level.
This parameter allows the user with this authority level to change the closing time in the area
where the function is entered.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > Extend Close
9.4.26 View Event Log
Default:
Authority Levels 1, 15: Enabled (E)
Authority Levels 2-14: Blank (-)
Selections:
– Blank(-): This function is not authorized for the user who is assigned this authority level.
– Enabled (E): This function is authorized for the user who is assigned this authority level.
This parameter allows the user with this authority level to view all control panel wide events in
the control panel's memory log.
Authority Level 15 is reserved for the Service Passcode (User 0) and cannot be changed.
RPS Menu Location
User Configuration > Authority Levels > View Event Log
9.4.27 User Command 7
Default:
Authority Levels 1: Enabled (E)
Authority Level All others: Blank (-)
Selections:
– Blank(-): This function is not authorized for the user who is assigned this authority level.
– Enabled (E): This function is authorized for the user who is assigned this authority level.