Bosch B9512G - User Reports

Control Panel Panel Wide Parameters | en 53
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
Personal Emergency Reports Route Group 1 Route Group 2 Route Group 3 Route Group 4
Silent / Hold-Up Alarm Yes Yes Yes Yes
Silent / Hold-Up Alarm
Restoral
Yes Yes Yes No
Panic Alarm Yes Yes Yes Yes
Panic Alarm Restoral Yes Yes Yes No
Selections:
– Yes - assign this report to the Route Group.
– No - do not assign this report to the Route Group.
RPS Menu Location
Panel Wide Parameters > Report Routing > Personal Emergency Reports.
RPS Menu Location
Panel Wide Parameters > Report Routing > Personal Emergency Reports
3.9.5 User Reports
Default:
User Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
Forced Point Yes Yes Yes No
Point Opening Yes Yes Yes No
Point Closing Yes Yes Yes No
Was Forced Armed Yes Yes Yes No
Fail to Open Yes Yes Yes No
Fail to Close Yes Yes Yes No
Extent Close Time Yes Yes Yes No
Opening Report No No No No
Forced Close No No No No
Closing Report No No No No
Forced Close Part On
Instant
No No No No
Forced Close Part On Delay No No No No
Part On Instant No No No No
Part On Delay No No No No
Send User Text Yes Yes Yes Yes
Selections:
– Yes - assign this report to the Route Group.
– No - do not assign this report to the Route Group.
RPS Menu Location
Panel Wide Parameters > Report Routing > User Reports.